Centrifugal Pump | Pumps & Couplings

S Type FRP Centrifugal Pump

admin — Fri, 29 Oct 2021 07:20:46 +0000

S Type FRP Centrifugal Pump is a monoblock pump, Pump material is Glass Fiber Reinforced Plastics.We are FRP pump manufacturers in China.

FRP Centrifugal Pump Summarize

S Type FRP Centrifugal Pump

S series FRP corrosion resistant Chemical centrifugal pump has two connection modes.
Mode 1: Motor and the pump is connected by a jaw coupling.
Mode 2: Monoblock type.
The advantages of the product are light weight, no deformation, high temperature resistance, corrosion resistance, easy maintenance.
Seal is corrugated mechanical seal with good sealing performance and long service life.
Used in petrochemical, dye, pesticide, pharmaceutical, water treatment, electroplating, battery separator and other industries.
Transfer of nonoxidizing acids less than 100 degrees Celsius.
For example: hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid, phosphoric acid, organic solution.
Note: Does not resist strong alkali.

FRP Centrifugal Pump

FRP Centrifugal Pump Data Sheet:

Model	Inlet (mm)	Outlet (mm)	Flow (m3/h)	Head (M)	Motor power (KW)	Speed (r/min)	Npshr (M)
S25X25-12.5	25	25	3.2	12.5	0.75	2900	3
S40X32-20	40	32	6.3	20	1.1	2900	3
S40X32-32	40	32	6.3	32	2.2	2900	3
S50X40-20	50	40	12.5	20	2.2	2900	3
S50X32-32	50	32	12.5	32	3/4	2900	3
S65X50-20	65	50	25	20	3	2900	3
S65X50-32	65	50	25	32	5.5	2900	3
S80X65-30	80	65	50	30	5.5	2900	4
S80X65-32	80	65	50	32	5.5/7.5	2900	4
S80X65-40	80	65	50	40	11	2900	4
S100X80-28	100	80	100	28	11	2900	4
S100X80-32	100	80	100	32	15	2900	4
S100X80-40	100	80	100	40	18.5	2900	4
S100X80-50	100	80	100	50	22/30	2900	5
S125X100-28	125	100	160	28	18.5/22	2900	5
S125X100-32	125	100	200	32	22/30	2900	5
S125X100-50	125	100	200	50	30/37	2900	5

S Type FRP Centrifugal Pump最先出现在Pumps & Couplings。

FRP Self priming Pump SZ Model

admin — Sat, 30 Oct 2021 08:07:30 +0000

FRP Self priming Pump Manufacturers In China. Model: SZ type.Pump body made of Glass Fiber Reinforced Plastics.

SZ FRP Pump Model Meaning:

SZ65-50-20
S:Centrifugal pump
Z:Self Priming type
65:Pump inlet (mm)
50:Pump outlet (mm)
20:Head (M)

Features:

All wetted parts of the pump are made of FRP (Glass Fiber Reinforced Plastics). After high temperature molding, with light weight, high strength, not easy deformation, corrosion resistance and other excellent performance.
The pump has strong self priming ability. Pump body internal suction chamber, liquid storage chamber, check valve, reflux hole.
Before starting the pump for the first time, ensure that some liquid is stored in the pump body. The gas in the pipeline should be removed first, without the need to install the bottom valve.
Widely used in petroleum, chemical, dye, printing and dyeing, pesticide, fertilizer and other industries.
Used for transferring hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, phosphoric acid, etc.

FRP Self priming Pump Data table:

Model	Pump inlet (mm)	Pump outlet (mm)	Flow (m3/h)	Head (M)	Motor Power (KW)	Speed (r/min)	Self-Priming Height (M)	Self-Priming Time (s/m)
SZ40-32-20	40	32	6.3	20	1.5	2900	4	65
SZ50-40-20	50	40	12.5	20	2.2	2900	4	65
SZ65-50-20	65	50	25	20	3/4	2900	4	65
SZ65-50-32	65	50	25	32	5.5	2900	4	65
SZ80-65-32	80	65	50	32	5.5/7.5	2900	4	65
SZ100-80-28	100	80	100	28	11	2900	4	65
SZ100-80-32	100	80	100	32	15	2900	4	65

FRP Self priming Pump SZ Model最先出现在Pumps & Couplings。

SL Type FRP Vertical Inline Pump

admin — Sat, 30 Oct 2021 08:53:02 +0000

SL Type FRP Vertical Inline Pump flow 3.2~100m3/h; Motor power:0.55KW~30KW;We are pump manufacturers in CHINA,offer best price for you.

SL type FRP inline pump Introduction：

Pump model: SL type
Pump type: Vertical inline centrifugal pump
Origin: China
Pump material: FRP(Glass Fiber Reinforced Plastics).
Resistance to corrosion and solvents.
Good sealing, not easy to aging, long service life.
High precision bearing, stable operation.
Copper core motor, low energy consumption, sufficient power, high efficiency.

FRP Vertical Inline Pump

Data table:

Model	Pump inlet (mm)	Pump outlet (mm)	Flow (m3/h)	Head (M)	Motor power (KW)	Speed (r/min)
SL25-12.5	25	25	3.2	12.5	0.55	2900
SL40-20	40	40	6.3	20	1.1	2900
SL40-32	40	40	6.3	32	2.2	2900
SL50-20	50	50	12.5	20	2.2	2900
SL50-32	50	50	12.5	32	3	2900
SL65-20	65	65	25	20	4	2900
SL65-32	65	65	25	32	5.5	2900
SL80-20	80	80	50	20	5.5	2900
SL80-32	80	80	50	32	7.5	2900
SL80-40	80	80	50	40	11	2900
SL100-20	100	100	100	20	11	2900
SL100-32	100	100	100	32	15	2900
SL100-40	100	100	100	40	18.5	2900
SL100-50	100	100	100	50	22/30	2900

SL Type FRP Vertical Inline Pump最先出现在Pumps & Couplings。

CYZ-A Self-priming Centrifugal Oil Pump

admin — Fri, 18 Jun 2021 14:18:04 +0000

CYZ-A model Self-priming Centrifugal Oil Pump use for transfer Gasoline, diesel, kerosene, seawater. This is an explosion-proof centrifugal pump.

CYZ-A Explosion-proof centrifugal pump
CYZ-A Self priming centrifugal oil pump

CYZ-A type explosion-proof self-priming centrifugal oil pump overview

CYZ-A type self-priming centrifugal pump produced by the unit is A new type of pump products developed according to the relevant technical data at home and abroad after digestion, absorption and improvement. The blank is unique in China. The self-priming centrifugal pump is suitable for the oil industry, land oil depot and tank truck ideal products.
And suitable for Marine cargo pump, bilge pump, fire pump and ballast pump and machine cooling water circulation, respectively transport gasoline, kerosene, diesel, jet fuel and other petroleum products and sea water, clear water, medium temperature -20℃ ~ 140℃, such as the transport of chemical liquid can be used to corrosion resistant mechanical seal.

CYZ-A Self-priming Centrifugal Oil Pump Product Characteristics

The pump is a self-priming centrifugal pump, self-priming centrifugal pump has the advantages of simple structure, convenient operation, smooth operation, easy maintenance, high efficiency, long life, with strong self-priming capacity and so on.
There is no need for bottom valve in pipeline, and only need to ensure that there is quantitative oil in the pump body before work.
When used on oil tankers or water delivery ships, it can also be used as tank sweeper with good effect.

Self-priming centrifugal pump is made of high quality materials, the seal is made of hard alloy mechanical seal, durable, the pipeline does not need to install the safety valve, suction pipeline does not need to install the bottom valve, thus simplifying the pipeline system, and improve the working conditions.

Table of main performance parameters of CYZ-A Self-priming Centrifugal Oil Pump

CYZ Oil pump model	Motor power (kw)	Speed （r/min）	Pump caliber (mm)	Flow (m3/h)	Head (m)
25CYZ-A-20	1.1	2900	25	3.2	20
25CYZ-A-20	1.5	2900	25	3.2	32
32CYZ-A-20	3	2900	32	3.2	50
40CYZ-A-20	1.5	2900	40	6.3	20
40CYZ-A-32	2.2	2900	40	6.3	32
40CYZ-A-40	4	2900	40	10	40
40CYZ-A-50	4	2900	40	6.3	50
50CYZ-A-12	1.5	2900	50	12.5	12
50CYZ-A-20	2.2	2900	50	15	20
50CYZ-A-30	3	2900	50	12.5	30
50CYZ-A-35	4	2900	50	12.5	35
50CYZ-A-40	4	2900	50	10	40
50CYZ-A-50	5.5	2900	50	12.5	50
50CYZ-A-60	7.5	2900	50	12.5	60
50CYZ-A-75	11	2900	50	15	75
65CYZ-A-15	3	2900	65	30	15
65CYZ-A-32	5.5	2900	65	25	32
65CYZ-A-50	7.5	2900	65	25	50
65CYZ-A-70	15	2900	65	25	70
80CYZ-A-13	3	2900	80	35	13
80CYZ-A-17	4	2900	80	43	17
80CYZ-A-22	5.5	2900	80	40	22
80CYZ-A-25	7.5	2900	80	50	25
80CYZ-A-32	7.5	2900	80	50	32
80CYZ-A-40	11	2900	80	50	40
80CYZ-A-55	18.5	2900	80	60	55
80CYZ-A-70	22	2900	80	60	70
100CYZ-A-20	7.5	2900	100	80	20
100CYZ-A-25	11	2900	100	100	25
100CYZ-A-32	15	2900	100	100	32
100CYZ-A-40	18.5	2900	100	100	40
100CYZ-A-50	22	2900	100	100	50
100CYZ-A-65	30	2900	100	100	65
100CYZ-A-75	30	2900	100	100	75
150CYZ-A-20	18.5	1450	150	180	20
150CYZ-A-30	30	1450	150	170	30
150CYZ-A-45	37	2900	150	160	45
150CYZ-A-55	45	2900	150	160	80
150CYZ-A-65	55	2900	150	170	65
150CYZ-A-80	55	2900	150	160	80
200CYZ-A-32	90	1450	200	400	32
250CYZ-A-50	90	1450	250	400	50
300CYZ-A-50	110	1450	300	500	50

CYZ-A Self-priming Centrifugal Oil Pump instructions

(I) Preparation and inspection before starting:

The oil pumps of this series are lubricated with high-quality calcium butter and No. 10 oil respectively according to their operating conditions. If pump is lubricated with butter, the bearing box should be filled with butter regularly; if the pump is lubricated with oil, the oil level should be fully added.
Check whether the liquid storage in the pump shell is higher than upper edge impeller. If it is insufficient, liquid storage can be directly injected into pump body from liquid filling port on pump shell.
Check whether rotating parts of the pump are stuck or knocked against.
Check whether bottom foot of the pump body and the nuts at connection are loose.
Check the coaxiality or parallelism of the pump shaft and motor spindle.
Check whether there is air leakage in the inlet pipeline. If there is air leakage, try to remove it.
Open inlet valve, slightly (not fully) open outlet control valve.

(2) Stop the pump

The gate valve on the discharge line must be closed first.
Stop the pump.
In the cold season, the liquid storage in the pump body and the water in the cooling chamber bearing body should be emptised to prevent freezing and cracking of the machine parts.

CYZ-A Self-priming Centrifugal Oil Pump最先出现在Pumps & Couplings。

Plastic Centrifugal Pump FSB L/D Model

admin — Sun, 06 Jun 2021 14:26:32 +0000

FSB L/D model plastic centrifugal pump use for Long-term transfer of any concentration of acid, alkali, salt, strong oxidant and other corrosive liquids.The pump case and the all wetted parts are made of F46 fluorine alloy.

FSB-L Model Plastic Centrifugal Pump

FSB-L Model is Horizontal install End suction fluorine alloy chemical centrifugal pump.Pump and coupling use flexible coupling link;

Plastic Centrifugal Pump FSB L Model

Transportation of chlor-alkali,chlorobenzene, pickling, pesticide, medicine, corrosive substances.

FSB - L Design features

Whole plastic pump body, Cantilever structure, no load bearing, but light and easy to maintain.

FSB - L Structure

1:Pump shell: Fluoroplastic alloy; 2:Pump cover:HT200 and F46; 3:Impeller:Fluoroplastic alloy; 4:Sealing ring:Fluorine rubber; 5:Machanical seal:WB2; 6:Rack:HT200;

Performance data

FSB centrifuge pump (model)	Flow (M3/h)	Head (m)	Inlet (mm)	Outlet (mm)	Motor power (KW)	speed (r/min)	NPSHr (m)
25FSB-25 L	3.6	25	25	25	1.5	2900	3.0
40FSB-15 L	5	15	40	32	3	2900	3.0
40FSB-20 L	10	20	40	32	3	2900	3.0
40FSB-30 L	10	30	40	32	3	2900	3.0
50FSB-20 L	12.5	20	50	32	3	2900	3.0
50FSB-25 L	12.5	25	50	32	3	2900	3.0
50FSB-30 L	12.5	30	50	32	3	2900	3.5
65FSB-32 L	25	32	65	50	5.5	2900	3.5
80FSB-20 L	50	20	80	65	5.5	2900	3.5
80FSB-25 L	50	25	80	65	7.5	2900	3.5
80FSB-30 L	50	30	80	65	7.5	2900	3.5
80FSB-40 L	45	40	80	65	11	2900	3.5
80FSB-50 L	50	50	80	65	15	2900	3.5
100FSB-32 L	100	32	100	80	15	2900	3.5

FSB-D Model Plastic Centrifugal Pump

Same use as FSB-L，There's just no elastic coupling.This is a monoblock pump.

Monoblock Plastic Pump FSB D Model

FSB - D Structure

1:Pump shell:Fluoroplastic alloy; 2:Impeller:Fluoroplastic alloy; 3:Pressure cover; 4:Pump cover; 5:Mechanical seal; 6:Rack;

Performance data

FSB centrifuge pump (model)	Flow (M3/h)	Head (m)	Inlet (mm)	Outlet (mm)	Motor power (KW)	speed (r/min)	NPSHr (m)
25FSB-25 D	3.6	25	25	25	1.5	2900	3.0
40FSB-15 D	5	15	40	32	3	2900	3.0
40FSB-20 D	10	20	40	32	3	2900	3.0
40FSB-30 D	10	30	40	32	3	2900	3.0
50FSB-20 D	12.5	20	50	32	3	2900	3.0
50 FSB-25 D	12.5	25	50	32	3	2900	3.0
50FSB-30 D	15	30	50	32	3	2900	3.5
65FSB-32 D	25	32	65	50	5.5	2900	3.5
80FSB-20 D	50	20	80	65	5.5	2900	3.5
80FSB-25 D	50	25	80	65	7.5	2900	3.5
80FSB-30 D	50	30	80	65	7.5	2900	3.5
80FSB-40 D	45	40	80	65	11	2900	3.5
80FSB-50 D	50	50	80	65	15	2900	3.5
100FSB-32 D	100	32	100	80	15	2900	3.5

Plastic Centrifugal Pump FSB L/D Model最先出现在Pumps & Couplings。

ZX Self-priming Centrifugal Pump

admin — Sun, 06 Jun 2021 10:18:37 +0000

ZX self-priming centrifugal pump is Horizontal single stage centrifugal water pump. Material has cast iron and stainless steel;Flow:3.2~550m3/H;

Model meaning:

50ZX20-30
50:Inlet size 50mm;
ZX:self-priming pump（ZX series）;
20:Flow:20m3/h;
30:Head:30 M;

ZX Centrifugal Pump Performance data:

Model	Flow (m3/h)	Flow (L/S)	Head (m)	Suction head (m)	Speed (r/min)	Self-priming performance （min/5m）	Motor (KW)
25ZX3.2-20	3.2	0.9	20	6.5	2900	1.9	0.75
25ZX3.2-32	3.2	0.9	32	6.5	2900	1.8	1.1
40ZX6.3-20	6.3	1.8	20	6.5	2900	1.9	11
40ZX10-40	10	2.8	40	6.5	2900	1.5	4
50ZX15-12	15	4.2	12	6.5	2900	2.4	1.5
50ZX18-20	18	5	20	6.5	2900	1.9	2.2
50ZX12.5-32	12.5	3.5	32	6.5	2900	1.5	3
50ZX20-30	20	5.6	30	6.5	2900	1.5	4
50ZX14-35	14	3.9	35	6.5	2900	1.5	4
50ZX10-40	10	2.8	40	6.5	2900	1.5	4
50ZX12.5-50	12.5	3.5	50	6.5	2900	1.4	5.5
50ZX15-60	15	4.2	60	6.5	2900	1.3	7.5
50ZX20-75	20	5.6	75	6.5	2900	1.3	11
65ZX30-15	30	8.3	15	6.5	2900	2	3
65ZX25-32	25	6.9	32	6	2900	1.5	5.5
80ZX35-13	35	9.7	13	6	2900	3.4	3
80ZX43-17	43	12	17	6	2900	1.8	4
80ZX40-22	40	11.1	22	6	2900	1.9	5.5
80ZX50-25	50	13.9	25	6	2900	1.5	7.5
80ZX50-32	50	13.9	32	6	2900	1.5	7.5
80ZX60-55	60	16.7	55	6	2900	1.5	18.5
80ZX60-70	60	16.7	70	6	2900	1.2	22
100ZX100-20	100	27.8	20	6	2900	1.8	11
100ZX100-40	100	27.8	40	6	2900	1.8	22
100ZX100-65	100	27.8	65	6	2900	1.8	30
100ZX70-75	70	19.4	75	6	2900	1.8	30
150ZX170-55	170	47.2	55	5	2900	1.8	45
150ZX170-65	170	47.2	65	5	2900	1.3	55
150ZX160-80	160	44.4	80	5	2900	1.2	55
200ZX400-32	400	111.1	32	5	1450	2	55
200ZX280-63	280	77.8	63	5	1450	1.5	90
200ZX350-65	350	97.2	65	5	1450	1.5	110
250ZX550-32	550	152.8	32	5	1450	2	75
250ZX400-50	400	111.1	50	5	1450	2	90
250ZX450-55	450	125	55	5	1450	2	110
250ZX400-75	400	111.1	75	5	1450	1.5	132
300ZX600-32	600	166.7	32	5	1450	2	90
300ZX500-50	500	138.9	50	5	1450	2	110
300ZX550-55	550	152.8	55	5	1450	2	132

ZX Self-priming Centrifugal Pump最先出现在Pumps & Couplings。

Lined Centrifugal Pump : PVDF PTFE Fluoroplastic Lined

admin — Sun, 06 Jun 2021 06:02:45 +0000

PVDF PTFE F46 (fluorine plastic) Fluoroplastic Lined Centrifugal Pump: use for acid washing,painting, electrolyte,wastewater treatment,acid transportation,chemical. Lined material: PVDF,PTFE,F46,Fluoroplastic.

Fluoroplastic Centrifugal Pump Characteristics

In accordance with international standards, lined with fluorine plastics, with metal materials.

Lined Centrifugal Pump Structure and materials

1:Pump shell:HT200 and F46; 2:Impeller:Fluoroplastic alloy; 3:Pump cover:HT200 and F46; 4:Rack:HT200; 5:Bearing box:HT200; 6:Mechanical seal:WB2; 7:Pump shaft:45# steel; 8:Shaft coupling:HT200; 9:Base:HT200

1:Pump shell:HT200 and F46; 2:Impeller:Fluoroplastic alloy; 3:Pump cover:HT200 and F46; 4:Rack:HT200; 5:Bearing box:HT200; 6:Impeller nut:HT200/F46; 7:Mechanical seal:Single seal; 8:Mechanical seal:Double seal; 9:Pump shaft:45#steel; 10:Base:HT200; 11:Shaft coupling:45# steel;

Pump Model meaning:

FLP65-50-125
FL:Fluoroplastic Lined;
P:Pumps;
60:Inlet diameter 65mm;
50:Outlet diameter 50mm;
Impeller Diameter 125mm;

Performance Data 2900RPM and 1450RPM:

Speed=2900RPM; Medium density=1000kg/m³

No.	Model	Flow (m³/h)	Pump head (m)	Inlet (mm)	Outlet (mm)	NPSHr (m)	Power (kw)	Weight (kg)
1	FLP25-20-125	1.7	20	φ25	φ20	3	1.1	80
2	FLP25-20-160	1.7	32	φ25	φ20	3	2.2	90
3	FLP32-25-125	3.6	20	φ32	φ20	3	1.5	98
4	FLP32-25-160	3.6	32	φ32	φ20	3	2.2	116
5	FLP40-25-125	6.3	20	φ40	φ25	3	1.5	98
6	FLP40-25-160	6.3	32	φ40	φ25	3	3	100
7	FLP40-25-200	6.3	50	φ40	φ25	3	5.5	170
8	FLP40-32-250	6.3	80	φ40	φ25	3	11	255
9	FLP50-32-125	12.5	20	φ50	φ32	3	2.2	110
10	FLP50-32-160	12.5	32	φ50	φ32	3	4	135
11	FLP50-32-200	12.5	50	φ50	φ32	3	7.5	180
12	FLP50-32-250	12.5	80	φ50	φ32	5	11	255
13	FLP65-50-125	25	20	φ65	φ50	3.5	3	135
14	FLP65-50-160	25	32	φ65	φ50	3.5	5.5	155
15	FLP65-40-200	25	50	φ65	φ40	3.5	11	210
16	FLP65-40-250	25	80	φ65	φ40	3.5	18.5	360
17	FLP80-65-125	50	20	φ80	φ65	4	5.5	195
18	FLP80-65-160	50	32	φ80	φ65	4	11	228
19	FLP80-50-200	50	50	φ80	φ50	4	15	250
20	FLP80-50-250	50	80	φ80	φ50	4.5	30	480
21	FLP100-80-125	100	20	φ100	φ80	4.5	11	245
22	FLP100-80-160	100	32	φ100	φ80	5	15	250
23	FLP100-65-200	100	50	φ100	φ65	5	30	480
24	FLP100-65-250	100	80	φ100	φ65	5	45	880
25	FLP125-100-160	160	32	φ125	Φ100	5	30	630
26	FLP125-100-200	200	50	φ125	φ100	6	55	980
27	FLP125-100-250	200	80	φ125	φ100	6	75	1100

2900RPM/min

Speed=1450RPM; Medium density=1000kg/m³

No.	Model	Flow (m³/h)	Pump head (m)	Inlet (mm)	Outlet (mm)	NPSHr (m)	Power (kw)
1	FLP32-25-125	1.8	5	Φ32	Φ25	3	0.55
2	FLP32-25-160	1.8	8	Φ32	Φ25	3	0.55
3	FLP40-25-160	4	8	φ40	φ25	3	0.55
4	FLP40-25-200	4	12	φ40	φ25	3	0.55
5	FLP40-25-250	4	20	φ40	φ25	2	1.5
6	FLP50-32-125	6.3	5	φ50	φ32	3	0.55
7	FLP50-32-160	6.3	8	φ50	φ32	3	0.55
8	FLP50-32-200	6.3	12.5	φ50	φ32	3	1.1
9	FLP50-32-250	6.3	20	φ50	φ32	5	1.5
10	FLP65-50-125	12.5	5	φ65	φ50	3.5	0.55
11	FLP65-50-160	12.5	8	φ65	φ50	3.5	1.1
12	FLP65-40-200	12.5	12.5	φ65	φ40	3.5	1.5
13	FLP65-40-250	12.5	20	φ65	φ40	3.5	3
14	FLP80-65-125	25	5	φ80	φ65	4	1.1
15	FLP80-65-160	25	8	φ80	φ65	4	1.5
16	FLP80-50-200	25	12.5	φ80	φ50	4	2.2
17	FLP80-50-250	25	20	φ80	φ50	4.5	4
18	FLP100-80-125	50	5	φ100	φ80	4.5	1.5
19	FLP100-80-160	50	8	φ100	φ80	5	2.2
20	FLP100-65-200	50	12.5	φ100	φ65	5	4
21	FLP100-65-250	50	20	φ100	φ65	5	7.5
22	FLP125-100-160	80	8	φ125	φ80	5	4
23	FLP125-100-200	100	12.5	φ125	φ100	6	7.5
24	FLP125-100-250	100	20	φ125	φ100	6	15
25	FLP150-125-250	200	20	φ150	φ125	7	22
26	FLP150-125-315	200	32	φ150	φ125	7	45
27	FLP150-125-400	200	50	φ150	φ125	7	75
28	FLP200-150-250	400	20	φ200	φ150	7.5	45
29	FLP200-150-315	400	32	φ200	φ150	7.5	75
30	FLP200-150-400	400	50	φ200	φ150	7.5	110
31	FLP300-250-400	1150	40	φ300	φ250	8	200

1450RPM/min

Lined Centrifugal Pump : PVDF PTFE Fluoroplastic Lined最先出现在Pumps & Couplings。

PVDF PTFE Lined Magnetic Drive Centrifugal Pump

admin — Fri, 04 Jun 2021 10:05:49 +0000

KMP Model PVDF PTFE lined magnetic drive centrifugal pump use transportation of pesticides,pharmaceuticals,strong acids and bases.

PTFE Lined Magnetic Drive Centrifugal Pump Design features

Simple

KMP removed the back cover, simple structure and long life.

Long life friction material

Silicon carbide friction material, extended service life.

New material

KMP series uses a lot of new material.

PVDF PTFE Lined pump Part drawing

1:Shell; 2:Static ring; 3:Spindle; 4:Impeller; 5:Isolation sleeve; 6:Strengthening sleeve; 7:Support; 8:External magnetism; 9:Motor;

Lined centrifugal pump Structure and materials

Impeller diameter＜250mm: 1:Pump sheel:HT200 lining PTFE/PVDF/F46; 2:Static ring:SIC; 3:Impeller:F46/NdFeB; 4:Sealing ring: Fluorine rubber; 5:Spindle:SIC; 6:Shaft sleeve:SIC; 7:Isolation sleeve:F46/PEEK; 8:External magnetism:HT200/NdFeB.

Impeller diameter≥250mm: 1:Pump sheel:HT200 lining PTFE/PVDF/F46; 2:Static ring:SIC; 3:Impeller:F46/NdFeB; 4:Back cover:HT200 lining F46; 5:Spindle:SIC; 6:Shaft sleeve:SIC; 7:Isolation sleeve:F46/PEEK; 8:External magnetism:HT200/NdFeB.

KMP Lined Centrifugal Pump Model Meaning

50KMP-30 G J K
50:Calibre is 50mm;
K:Number K;
MP:Magnetic drive Pump;
30:Head 30M;
H:High temperature type;
L:Lye type;
G:Granular type;

Performance data:

Model	Flow (M3/h)	Head (M)	NPSHr (M)	Inlet X Outlet (mm)	Speed (r/min)	Motor power (KW)
32KMP-20	3.6	20	3	32 X 20	2900	1.1
32KMP-32	3.6	32	3	32 X 20	2900	2.2
40KMP-20	6.3	20	3	40 X 25	2900	1.5
40KMP-32	6.3	32	3	40 X 25	2900	3
40KMP-50	6.3	50	3	40 X 25	2900	5.5
40KMP-80	6.3	80	3	40 X 32	2900	11
50KMP-20	12.5	20	3.2	50 X 32	2900	1.5
50KMP-32	12.5	32	3.2	50 X 32	2900	4
50KMP-50	12.5	50	3.2	50 X 32	2900	7.5
50KMP-80	12.5	80	3.2	50 X 32	2900	11
65KMP-20	25	20	3.5	65 X 50	2900	3
65KMP-25	18	25	3.5	65 X 50	2900	4
65KMP-32	25	32	3.5	65 X 50	2900	5.5
65KMP-50	25	50	3.5	65 X 40	2900	11
65KMP-80	25	80	3.5	65 X 40	2900	18.5
80KMP-20	50	20	4.5	80 X 65	2900	5.5
80KMP-32	50	32	4.5	80 X 65	2900	11
80KMP-50	50	50	4.5	80 X 50	2900	15
80KMP-80	50	80	4.5	80 X 50	2900	30
100KMP-20	100	20	5	100 X 80	2900	15
100KMP-32	100	32	5	100 X 80	2900	18.5
100KMP-40	100	40	5	100 X 80	2900	30
125KMP-15	170	15	5.5	125 X 100	2900	22
125KMP-20	170	20	5.5	125 X 100	2900	30
125KMP-30	190	30	5.5	125 X 100	2900	37
125KMP-40	200	40	5.5	125 X 100	2900	45
125KMP-50	200	50	5.5	125 X 100	2900	55

KMP series Lined Magnetic Drive Centrifugal Pump can be customized according to requirements. 1:High temperature type-H,Maximum temperature is 180℃； 2: Lye type-L; 3:Granular-G;

PVDF PTFE Lined Magnetic Drive Centrifugal Pump最先出现在Pumps & Couplings。

Hot Oil Pump

admin — Wed, 26 May 2021 12:56:46 +0000

Hot oil pumps main use for hot(thermal) oil circulation and transfer, Belongs to centrifugal pump;Suitable temperature:≤350℃.

Flow: 1~400m3/H;
The material have cast steel.
Application: resin, petroleum, rubber, textile, printing, asphalt truck, heat conducting oil furnace, boiler, paper making…

Hot Oil Transfer Model Meaning

50-32-160 A
50: pump inlet size
32: pump outlet size
160: impeller diameter
A: impeller has been cutted first

Centrifugal Hot Oil Circulation Pump Data Table

Model	Flow (m3/h)	Head (m)	Speed (r/min)	Motor(KW)
15-15-100	3	10	2800	0.75
15-15-100A	2	10	2800	0.55
15-15-100B	1	10	2800	0.37
20-20-100	1	10	2800	0.37
20-20-125	1.5	22	2800	0.75
40-25-160	10	28	2900	2.2
25-25-160	3	27	2900	1.5
32-32-160	6	28	2900	1.5
50-32-160	12.5	30	2900	3.0
50-32-200	18	40	2900	5.5
50-32-200A	16	32	2900	4
50-32-250	12.5	80	2900	11
65-50-160	20	32	2900	5.5
65-40-200	30	48	2900	7.5
65-40-200A	25	35	2900	5.5
65-40-250	25	80	2900	15
65-40-250A	20	51	2900	7.5
65-40-315	25	125	2900	30
65-40-315A	22.5	100	2900	22
80-50-200	50	50	2900	15
80-50-200A	45	40	2900	11
80-50-200B	40	32	2900	7.5
80-50-250	50	80	2900	22
80-50-250A	43	60	2900	15
80-50-315	50	125	2900	45
80-50-315A	45	100	2900	30
100-65-200	100	50	2900	22
100-65-200A	94	44	2900	22
100-65-200B	87	38	2900	15
100-65-200C	80	32	2900	15
100-65-250	100	80	2900	37
100-65-250A	95	72	2900	37
100-65-250B	90	65	2900	30
100-65-250C	85	50	2900	30
100-65-315	100	125	2900	75
100-65-315A	95	113	2900	55
100-65-315B	90	100	2900	55
100-65-315C	82	84	2900	45
125-100-200	200	50	2900	45
125-100-200A	178	40	2900	37
125-100-250	200	70	2900	55
125-100-250A	190	63	2900	55
125-100-250B	180	57	2900	45
125-100-250C	170	51	2900	45
125-100-250D	150	70	2900	45
150-150-200	350	50	2900	75
150-150-200A	313	40	2900	55
200-150-400	350	50	1450	75
200-150-400A	330	45	1450	75
250-200-400	500	50	1480	110
250-200-500	500	80	1480	160
250-200-500A	400	50	1480	90

Hot Oil Transfer Pump

Hot Oil Pump最先出现在Pumps & Couplings。

GF Stainless steel centrifugal pump

admin — Fri, 21 May 2021 04:50:02 +0000

GF Stainless steel centrifugal pump ,Horizontal install, end suction pump. Mainly used for conveying corrosive liquid, cleaning system, food processing, medicine and health, sewage treatment, electroplating bleaching and dyeing, fine chemical industry, and environmental protection engineering..

GF centrifugal pump model:

25GF-8; 25GF-8D;
40GF-13; 40GF-13D; 40GF-13-A; 40GF-13D-A;
50GF-18; 50GF-18D; 50GF-18-A; 50GF-18D-A; 50GF-18T; 50GF-18DT; 50GF-18T-A; 50GF-18DT-A; 50GF-22; 50GF-22T; 50GF-22-A; 50GF-22T-A; 50GF-23; 50GF-23D; 50GF-23T; 50GF-23DT; 50GF-25; 50GF-25T; 50GF-25-A; 50GF-25T-A; 50GF-28; 50GF-28T; 50GF-32; 50GF-32T; 50GF-38; 50GF-38T;
65GF-28; 65GF-28T; 65GF-32; 65GF-32T; 65GF-40; 65GF-40T; 65GF-50; 65GF-50T;
80GF-13; 80GF-13T; 80GF-13-A; 80GF-13T-A; 80GF-22; 80GF-22T; 80GF-28; 80GF-28T; 80GF-30; 80GF-30T; 80GF-32T; 80GF-32T-A; 80GF-38T;
100GF-13; 100GF-13T; 100GF-20; 100GF-20T; 100GF-20T-A;
125GF-20T; 125GF-22T; 125GF-28T; 125GF-30T

Performance and advantages:

1, can transport a certain corrosive liquid.
2, stable structure, wide working range, easy maintenance.
3, can be equipped with a variety of motors, a variety of control equipment.
4, Adopt high quality mechanical seal, no leakage, long service life.
5, the use of open impeller, can deal with sewage and liquid containing fine sundries, transport capacity is strong.
6, the use of closed impeller, high efficiency, energy saving.
Material description: Stainless steel 304, 316, 316L three kinds of materials can be selected, customers can choose different materials according to different conveying medium or corrosive different.

GF Stainless steel centrifugal pump最先出现在Pumps & Couplings。