Lined Pump – PFA PVDF PTFE Fluoroplastic Plastic| Pumps & Couplings

Lined Magnetic Drive Pump LMDP Series

admin — Thu, 29 Jul 2021 08:55:07 +0000

LMDP Series fluorine plastic lined magnetic drive pump is orizontal installation chemical centrifugal pump;Use fluorine plastic,PVDF,PTFE lining.

Lined Magnetic Pump

Lined magnetic pump use for：

Petroleum chemical industry, acid and alkali, non-ferrous metal smelting.

Pickling process of automobile manufacturing, rare earth separation, pesticide.

Dye, medicine, paper, electroplating, radio and other industries.

Lined Magnetic Drive Pump LMDP Series Parameters:

Model	Inlet (mm)	Outlet (mm)	Flow (M3/h)	Head (m)	NPSHr (m)	Motor Power (kW)	Speed (r/min)	Voltage (V)
LMDP32-25-125	32	25	3. 2	20	3.2	1.1	2900	380
LMDP32-25-160	32	25	3. 2	32	3.2	2.2	2900	380
LMDP40-32-125	40	32	6. 3	20	3.5	1.5	2900	380
LMDP40-32-160	40	32	6. 3	32	3.5	2.2	2900	380
LMDP40-32-200	40	32	6. 3	50	3.5	5.5	2900	380
LMDP50-32-125	50	32	12. 5	20	3.5	2.2	2900	380
LMDP50-32-160	50	32	12. 5	32	3.5	4	2900	380
LMDP50-32-200	50	32	12. 5	50	3.5	7.5	2900	380
LMDP65-50-125	65	50	25	20	4	4	2900	380
LMDP65-50-160	65	50	25	32	4	5.5	2900	380
LMDP65-40-200	65	40	25	50	4	11	2900	380
LMDP80-65-125	80	65	50	20	4	7.5	2900	380
LMDP80-65-160	80	65	50	32	4	11	2900	380
LMDP80-50-200	80	50	50	50	4	18.5	2900	380
LMDP100-80-125	100	80	100	20	4	11	2900	380
LMDP100-80-160	100	80	100	32	4	18.5	2900	380

Lined Magnetic Drive Pump LMDP Series最先出现在Pumps & Couplings。

Lined Centrifugal Pump : PVDF PTFE Fluoroplastic Lined

admin — Sun, 06 Jun 2021 06:02:45 +0000

PVDF PTFE F46 (fluorine plastic) Fluoroplastic Lined Centrifugal Pump: use for acid washing,painting, electrolyte,wastewater treatment,acid transportation,chemical. Lined material: PVDF,PTFE,F46,Fluoroplastic.

Fluoroplastic Centrifugal Pump Characteristics

In accordance with international standards, lined with fluorine plastics, with metal materials.

Lined Centrifugal Pump Structure and materials

1:Pump shell:HT200 and F46; 2:Impeller:Fluoroplastic alloy; 3:Pump cover:HT200 and F46; 4:Rack:HT200; 5:Bearing box:HT200; 6:Mechanical seal:WB2; 7:Pump shaft:45# steel; 8:Shaft coupling:HT200; 9:Base:HT200

1:Pump shell:HT200 and F46; 2:Impeller:Fluoroplastic alloy; 3:Pump cover:HT200 and F46; 4:Rack:HT200; 5:Bearing box:HT200; 6:Impeller nut:HT200/F46; 7:Mechanical seal:Single seal; 8:Mechanical seal:Double seal; 9:Pump shaft:45#steel; 10:Base:HT200; 11:Shaft coupling:45# steel;

Pump Model meaning:

FLP65-50-125
FL:Fluoroplastic Lined;
P:Pumps;
60:Inlet diameter 65mm;
50:Outlet diameter 50mm;
Impeller Diameter 125mm;

Performance Data 2900RPM and 1450RPM:

Speed=2900RPM; Medium density=1000kg/m³

No.	Model	Flow (m³/h)	Pump head (m)	Inlet (mm)	Outlet (mm)	NPSHr (m)	Power (kw)	Weight (kg)
1	FLP25-20-125	1.7	20	φ25	φ20	3	1.1	80
2	FLP25-20-160	1.7	32	φ25	φ20	3	2.2	90
3	FLP32-25-125	3.6	20	φ32	φ20	3	1.5	98
4	FLP32-25-160	3.6	32	φ32	φ20	3	2.2	116
5	FLP40-25-125	6.3	20	φ40	φ25	3	1.5	98
6	FLP40-25-160	6.3	32	φ40	φ25	3	3	100
7	FLP40-25-200	6.3	50	φ40	φ25	3	5.5	170
8	FLP40-32-250	6.3	80	φ40	φ25	3	11	255
9	FLP50-32-125	12.5	20	φ50	φ32	3	2.2	110
10	FLP50-32-160	12.5	32	φ50	φ32	3	4	135
11	FLP50-32-200	12.5	50	φ50	φ32	3	7.5	180
12	FLP50-32-250	12.5	80	φ50	φ32	5	11	255
13	FLP65-50-125	25	20	φ65	φ50	3.5	3	135
14	FLP65-50-160	25	32	φ65	φ50	3.5	5.5	155
15	FLP65-40-200	25	50	φ65	φ40	3.5	11	210
16	FLP65-40-250	25	80	φ65	φ40	3.5	18.5	360
17	FLP80-65-125	50	20	φ80	φ65	4	5.5	195
18	FLP80-65-160	50	32	φ80	φ65	4	11	228
19	FLP80-50-200	50	50	φ80	φ50	4	15	250
20	FLP80-50-250	50	80	φ80	φ50	4.5	30	480
21	FLP100-80-125	100	20	φ100	φ80	4.5	11	245
22	FLP100-80-160	100	32	φ100	φ80	5	15	250
23	FLP100-65-200	100	50	φ100	φ65	5	30	480
24	FLP100-65-250	100	80	φ100	φ65	5	45	880
25	FLP125-100-160	160	32	φ125	Φ100	5	30	630
26	FLP125-100-200	200	50	φ125	φ100	6	55	980
27	FLP125-100-250	200	80	φ125	φ100	6	75	1100

2900RPM/min

Speed=1450RPM; Medium density=1000kg/m³

No.	Model	Flow (m³/h)	Pump head (m)	Inlet (mm)	Outlet (mm)	NPSHr (m)	Power (kw)
1	FLP32-25-125	1.8	5	Φ32	Φ25	3	0.55
2	FLP32-25-160	1.8	8	Φ32	Φ25	3	0.55
3	FLP40-25-160	4	8	φ40	φ25	3	0.55
4	FLP40-25-200	4	12	φ40	φ25	3	0.55
5	FLP40-25-250	4	20	φ40	φ25	2	1.5
6	FLP50-32-125	6.3	5	φ50	φ32	3	0.55
7	FLP50-32-160	6.3	8	φ50	φ32	3	0.55
8	FLP50-32-200	6.3	12.5	φ50	φ32	3	1.1
9	FLP50-32-250	6.3	20	φ50	φ32	5	1.5
10	FLP65-50-125	12.5	5	φ65	φ50	3.5	0.55
11	FLP65-50-160	12.5	8	φ65	φ50	3.5	1.1
12	FLP65-40-200	12.5	12.5	φ65	φ40	3.5	1.5
13	FLP65-40-250	12.5	20	φ65	φ40	3.5	3
14	FLP80-65-125	25	5	φ80	φ65	4	1.1
15	FLP80-65-160	25	8	φ80	φ65	4	1.5
16	FLP80-50-200	25	12.5	φ80	φ50	4	2.2
17	FLP80-50-250	25	20	φ80	φ50	4.5	4
18	FLP100-80-125	50	5	φ100	φ80	4.5	1.5
19	FLP100-80-160	50	8	φ100	φ80	5	2.2
20	FLP100-65-200	50	12.5	φ100	φ65	5	4
21	FLP100-65-250	50	20	φ100	φ65	5	7.5
22	FLP125-100-160	80	8	φ125	φ80	5	4
23	FLP125-100-200	100	12.5	φ125	φ100	6	7.5
24	FLP125-100-250	100	20	φ125	φ100	6	15
25	FLP150-125-250	200	20	φ150	φ125	7	22
26	FLP150-125-315	200	32	φ150	φ125	7	45
27	FLP150-125-400	200	50	φ150	φ125	7	75
28	FLP200-150-250	400	20	φ200	φ150	7.5	45
29	FLP200-150-315	400	32	φ200	φ150	7.5	75
30	FLP200-150-400	400	50	φ200	φ150	7.5	110
31	FLP300-250-400	1150	40	φ300	φ250	8	200

1450RPM/min

Lined Centrifugal Pump : PVDF PTFE Fluoroplastic Lined最先出现在Pumps & Couplings。

PVDF PTFE Lined Magnetic Drive Centrifugal Pump

admin — Fri, 04 Jun 2021 10:05:49 +0000

KMP Model PVDF PTFE lined magnetic drive centrifugal pump use transportation of pesticides,pharmaceuticals,strong acids and bases.

PTFE Lined Magnetic Drive Centrifugal Pump Design features

Simple

KMP removed the back cover, simple structure and long life.

Long life friction material

Silicon carbide friction material, extended service life.

New material

KMP series uses a lot of new material.

PVDF PTFE Lined pump Part drawing

1:Shell; 2:Static ring; 3:Spindle; 4:Impeller; 5:Isolation sleeve; 6:Strengthening sleeve; 7:Support; 8:External magnetism; 9:Motor;

Lined centrifugal pump Structure and materials

Impeller diameter＜250mm: 1:Pump sheel:HT200 lining PTFE/PVDF/F46; 2:Static ring:SIC; 3:Impeller:F46/NdFeB; 4:Sealing ring: Fluorine rubber; 5:Spindle:SIC; 6:Shaft sleeve:SIC; 7:Isolation sleeve:F46/PEEK; 8:External magnetism:HT200/NdFeB.

Impeller diameter≥250mm: 1:Pump sheel:HT200 lining PTFE/PVDF/F46; 2:Static ring:SIC; 3:Impeller:F46/NdFeB; 4:Back cover:HT200 lining F46; 5:Spindle:SIC; 6:Shaft sleeve:SIC; 7:Isolation sleeve:F46/PEEK; 8:External magnetism:HT200/NdFeB.

KMP Lined Centrifugal Pump Model Meaning

50KMP-30 G J K
50:Calibre is 50mm;
K:Number K;
MP:Magnetic drive Pump;
30:Head 30M;
H:High temperature type;
L:Lye type;
G:Granular type;

Performance data:

Model	Flow (M3/h)	Head (M)	NPSHr (M)	Inlet X Outlet (mm)	Speed (r/min)	Motor power (KW)
32KMP-20	3.6	20	3	32 X 20	2900	1.1
32KMP-32	3.6	32	3	32 X 20	2900	2.2
40KMP-20	6.3	20	3	40 X 25	2900	1.5
40KMP-32	6.3	32	3	40 X 25	2900	3
40KMP-50	6.3	50	3	40 X 25	2900	5.5
40KMP-80	6.3	80	3	40 X 32	2900	11
50KMP-20	12.5	20	3.2	50 X 32	2900	1.5
50KMP-32	12.5	32	3.2	50 X 32	2900	4
50KMP-50	12.5	50	3.2	50 X 32	2900	7.5
50KMP-80	12.5	80	3.2	50 X 32	2900	11
65KMP-20	25	20	3.5	65 X 50	2900	3
65KMP-25	18	25	3.5	65 X 50	2900	4
65KMP-32	25	32	3.5	65 X 50	2900	5.5
65KMP-50	25	50	3.5	65 X 40	2900	11
65KMP-80	25	80	3.5	65 X 40	2900	18.5
80KMP-20	50	20	4.5	80 X 65	2900	5.5
80KMP-32	50	32	4.5	80 X 65	2900	11
80KMP-50	50	50	4.5	80 X 50	2900	15
80KMP-80	50	80	4.5	80 X 50	2900	30
100KMP-20	100	20	5	100 X 80	2900	15
100KMP-32	100	32	5	100 X 80	2900	18.5
100KMP-40	100	40	5	100 X 80	2900	30
125KMP-15	170	15	5.5	125 X 100	2900	22
125KMP-20	170	20	5.5	125 X 100	2900	30
125KMP-30	190	30	5.5	125 X 100	2900	37
125KMP-40	200	40	5.5	125 X 100	2900	45
125KMP-50	200	50	5.5	125 X 100	2900	55

KMP series Lined Magnetic Drive Centrifugal Pump can be customized according to requirements. 1:High temperature type-H,Maximum temperature is 180℃； 2: Lye type-L; 3:Granular-G;

PVDF PTFE Lined Magnetic Drive Centrifugal Pump最先出现在Pumps & Couplings。