Bitumen Screw Pump With Jacketed

admin — Wed, 25 Aug 2021 07:56:48 +0000

Bitumen screw pump is a kind three screw pump.This pump pump body with jacketed.Use for deliver bitumen (asphalt),heavy fuel oil,heavy gear oil and etc..Heat carrier may be steam, hot oil or hot water.Whihle cold carrier may be gas or liquid. This pump are used in the fields of petroleum,chemical,galss,road and etc..

Features:

Simple structure.
Small pressure pulsation.
Stable flow rate.
Allowable high rotating speed.
High efficiency.
Long life time and self-sucking capability.

Flow:0.2~600M3/H; Maxium working pressure is 6.3MPA. Use for ≤350℃.

Bitumen Screw Pump With Jacketed Data:

Pump model	Flow(M3/H)	Head(MPA)	Speed	Motor power
BSP45X2-46	4.28	0.6	960	1.5KW
BSP45X2-46	4.14	1	960	2.2KW
BSP45X2-46	4	1.6	960	4KW
BSP45X2-46	6.53	0.6	1450	2.2KW
BSP45X2-46	6.32	1	1450	3KW
BSP45X2-46	6.1	1.6	1450	5.5KW
BSP54X2-46	9.89	0.6	960	3KW
BSP54X2-46	9.73	0.8	960	4KW
BSP54X2-46	9.56	1.0	960	5.5KW
BSP54X2-46	15.1	0.6	1450	5.5KW
BSP54X2-46	14.6	1	1450	7.5KW
BSP80X2-46	16.8	0.6	960	5.5KW
BSP80X2-46	16.3	1	960	7.5KW
BSP80X2-46	25.7	0.6	1450	7.5KW
BSP80X2-46	24.8	1	1450	11KW
BSP90X2-46	34.2	0.6	960	11KW
BSP90X2-46	34	0.8	960	11KW
BSP90X2-46	33.1	1	960	15KW
BSP90X2-46	52.6	0.6	1450	15KW
BSP90X2-46	52	0.8	1450	18.5KW
BSP90X2-46	51.4	1	1450	22KW
BSP100X2-46	48.7	0.6	960	15KW
BSP100X2-46	48	0.8	960	15KW
BSP100X2-46	46.9	1	960	22KW
BSP100X2-46	72.7	0.6	1450	18.5KW
BSP100X2-46	72	0.8	1450	22KW
BSP100X2-46	71.2	1	1450	30KW
BSP110X2-46	60.9	0.6	960	18.5KW
BSP110X2-46	58.9	1	960	30KW
BSP110X2-46	96.7	00.6	1450	30KW
BSP110X2-46	94.6	1	1450	45KW

Bitumen Screw Pump With Jacketed最先出现在Pumps & Couplings。

Single Screw Pump

admin — Sun, 06 Jun 2021 09:13:03 +0000

Single screw pump use for fresh water, coagulant, soap water, industrial wastewater...;Speed:960RPM, or with gearmotor Transfer high viscosity liquid.

Single Screw Pump Structure

1：Outlet; 2:Pull rod; 3:Stator; 4:Screw shaft; 5:Universal joint assembly; 6:Inlet; 7:Connecting shaft; 8:packing; 9:Pressure cover; 10:collar; 11:Bearing; 12:Bearing Box; 13:Transmission shaft;

Desing feature

Single screw pump is a pull rotary mesh volume principle, the main working parts are eccentric screw(rotor) and fixed lining(stator). Due to the specialgeometry of the two parts, respectively to form a seal cavity alone. Medium introduced by the uniform axial flow, internal flow rated is low. The volume remains constant, pressure stability, and thus will not produce eddy current and stirring.

Pump Performance Data

Model	Inlet (mm)	Outlet (mm)	Flow (m3/h)	Head (m)	Speed (RPM)	Motor power (KW)
20-1	25	25	0.8	60	960	0.75
20-2	25	25	0.8	120	960	1.5
25-1	40	32	2	60	960	1.5
25-2	40	32	2	120	960	2.2
30-1	50	40	5	60	960	2.2
30-2	50	40	5	120	960	3
35-1	65	50	8	60	960	3
35-2	65	50	8	120	960	4
40-1	80	65	12	60	960	4
40-2	80	65	12	120	960	5.5
50-1	100	80	20	60	960	5.5
50-2	100	80	20	120	960	7.5
60-1	125	100	22	60	720	11
60-2	125	100	22	120	720	15
70-1	150	125	38	60	720	11
70-2	150	125	38	120	720	18.5
85-1	150	150	56	60	630	15
85-2	150	150	56	120	630	30
105-1	200	200	100	60	500	30
105-2	200	200	100	120	500	55
135-1	250	250	150	60	400	45
135-2	250	250	150	120	400	90

Single Screw Pump最先出现在Pumps & Couplings。

Screw Pump Manufacturers and Suppliers In CHINA | Pumps & Couplings